Southlake Pool Service Done Right

Your tech skims the surface, brushes walls, steps, and tile, vacuums the floor as needed, and checks and empties all skimmer and pump baskets. Water chemistry is tested and adjusted on the spot, and the equipment pad gets a quick visual check before we wrap up.

Nope. As long as we have access to your pool, we'll take it from there. Head to the office, run errands at Southlake Town Square, or drop the kids at Carroll ISD – your report lands in your inbox when we're done.

We offer bi-weekly service from November through February, when pool use slows down and conditions are more forgiving. The rest of the year, weekly is the right call. Southlake's cedar and oak pollen, clay soil, and summer heat all push chemistry and debris build-up faster than most people expect.

Every visit ends with a digital Poolie Report sent straight to your email – photos from the session, exact chemical readings, and a checklist of everything your tech completed. You always know the state of your pool, whether you are home or not.

Tarrant County sits on some of North Texas's most active shrink-swell clay, soil that expands when it gets wet and contracts when it dries out. That constant movement stresses pool shells, shifts plumbing joints, and pushes coping outward over time. The tricky part is that these problems develop slowly and often go unnoticed until the repair bill gets serious.

Poolie's pool inspection service in Southlake includes shell and plumbing checks. Our weekly visits track any unexplained water loss that could point to a developing issue beneath the surface.

Our Southlake pool service operates from our office at 1721 E Southlake Blvd, Suite 110 covers 76092 (Southlake proper), 76034 (Colleyville), 76021 (Bedford), 76051 (Grapevine), and 76262 (Westlake and Trophy Club).

We run regular routes through Timarron, Carillon, Shady Oaks, Southlake Estates, Stone Lakes, Trophy Club, Colleyville, Westlake, Keller, and Flower Mound. Not sure if your address is on our route? Call us and we'll check.

Yes. Our office is right on Southlake Blvd at 1721 E Southlake Blvd, Suite 110. Our techs run structured weekly routes across Tarrant County and the Mid-Cities and know the conditions Southlake pools deal with: Fort Worth water mineral load, Tarrant County shrink-swell clay, and cedar and oak pollen season from January through April.

For renovations and repair, work is done by Poolie staff directly, not subcontractors. You get an ETA before every visit and a full digital report after every pool maintenance in Southlake.

Southlake's moderately hard water can cause calcium scale, shift pool chemistry, and make pH more difficult to keep balanced.

Southlake receives Fort Worth water drawn from Eagle Mountain Lake, Lake Bridgeport, Richland Chambers, Cedar Creek Reservoir, and Lake Worth through the Tarrant Regional Water District, averaging 79.9 to 134 ppm depending on the season. Cedar pollen from January through April adds phosphates and organic matter that compound the challenge.

Our pool cleaning in Southlake TX includes calcium hardness, alkalinity, and pH testing at every visit, so scale and chemistry drift never get ahead of your pool.

Call (817) 903-2500 or fill out the form on poolie.com to schedule a filter cleaning in Southlake. Our pool maintenance in Southlake includes filter cleaning on a set schedule as part of every service plan, and if your filter needs attention outside the regular cycle, we'll add it to your next visit. Poolie handles cartridge and DE filter cleaning and replacement directly, no separate supplier needed.

Weekly pool service in Southlake starts around $165 per month for standard residential pools. Poolie's pricing depends on pool size, equipment, features, and service level. Fill out the form at poolie.com or call (817) 903-2500 for an upfront quote specific to your pool.

No. Shocking a pool raises chlorine levels to oxidize organic matter like algae, bacteria, and chloramines, but it does not remove physical dirt or debris. To clear actual dirt from a Southlake pool, the floor needs to be vacuumed and the surfaces brushed. Shocking handles the chemistry side; physical cleaning handles the debris. Our weekly Southlake pool service covers both at every weekly visit.

The fastest route to clearing a cloudy Southlake pool is testing the water first so you can treat the actual cause.

Cloudiness usually comes from one of three things: chemical imbalance, fine particles the filter isn't catching, or early algae growth. Once the cause is identified, the fix is targeted: adjust chemistry if pH or chlorine is off, run the filter longer and add a clarifier for particle issues, or shock and brush for algae.

Poolie's pool cleaning service in Southlake includes on-the-spot water testing and same-visit chemical adjustment, so cloudy water gets addressed before it becomes a bigger problem.

Yes, and especially in Southlake. Cedar season, clay soil, and North Texas summer heat all push pool chemistry and debris buildup faster than most homeowners expect. Consistent pool maintenance in Southlake prevents algae blooms, extends equipment life, and catches developing issues like shell stress or plumbing shifts before they require major repairs.

For pools with automation systems, water features, or premium finishes, which are common in Southlake, regular professional care also protects the investment those installations represent.

Mark the waterline and check it again after 24 hours. If it keeps falling beyond what you'd expect from normal evaporation, especially overnight when it's cooler, you've likely got a leak.

Don't sit on it. Leaks can erode your pool shell and damage the surrounding ground quickly. We use pressure testing and detection equipment to find the source and fix it properly.

It depends on the equipment type and manufacturer. Get in touch and we'll loop in our repair team to let you know whether we can support your specific setup.

New repair-only customers pay $199 before taxes. Existing Poolie customers pay $150. Either way, you get a full inspection by a certified tech, a straight explanation of what we found, and a written estimate, all before any work begins.

Pumps and filters are generally good for 7–12 years with regular maintenance, and heaters tend to run 5–10 years. Routine inspections catch early wear before it becomes a breakdown. We'll always give you a straight answer on whether fixing or replacing makes more sense for your situation.

More than most people realize. New interior surfaces, refreshed waterline tile, and properly reset coping can completely change how a pool looks and feels. Even focused updates – lighter plaster, updated LED lighting, cleaner tile lines – can transform an older pool without touching the structure.

It's one of the best times to make that upgrade. Switching to a variable-speed pump can meaningfully reduce your monthly electricity bill. We can also add automation so you're controlling your heater, lights, and pump from your phone – which makes a real difference when you're managing a busy Southlake schedule.

Fill out the form on our site, give us a call, or send a message. We'll follow up within one business day to talk through the scope and next steps.

We work with standard plaster, quartz aggregate, and pebble finishes. For Southlake pools that see heavy use and long summers, we usually lean toward pebble or quartz – they resist staining, and surface wear better than white plaster and stay looking sharp longer. We'll walk you through the options and help you pick based on your pool, your style, and how you use it.