Skip to main content
Round Rock Pool Perfection: Maintain Your Pool Like a Pro [Featured Image]

Round Rock Pool Perfection: Maintain Your Pool Like a Pro

Poolie Team: Apr 17, 2024

You have free time on Saturday afternoon, and you want to go for a swim. However, yesterday’s storm has spoiled your plans, as the leaves have littered the pool, and the water is murky. It was only a few days ago that the cleaning service was here. Do you call them again? Should you throw some chemicals and let the pump take care of the mess?

To keep your pool in a constant state of readiness, you need to invest effort and time into its maintenance. The same goes for any variable affecting the pool’s condition, such as the weather or the number of swimmers. A Round Rock pool service can handle many of these tasks, but a general knowledge of them can help you prevent minor issues from growing into emergencies that require immediate professional assistance.

This article will provide an insight into seasonal maintenance to help you avoid costly repairs and services.

Adjust Your Pool Care to the Weather

Keep up with cleaning, testing, and equipment checkups throughout the year. While keeping up the same pace is important, adjust to the conditions instead of blindly following the same old patterns.

Hot Weather: Watch Chlorine and Water Levels

Sunlight and swimmers can rob your pool of chlorine, so after a day of heavy use, test your water to make sure it’s not due for a chlorine boost.

Check your water level. Water can evaporate, especially on hot days, leaving your pool with too little water for your skimmer. Go by your equipment’s recommended level, and if your pool is mysteriously losing water, don’t keep topping it off – find the cause.

If you see white deposits around your pool, have your calcium hardness tested before you do any scale removal. Your fill water and maintenance history will affect the test results, so not every Round Rock pool has the same requirements.

Storms: Clean and Test Before Adding Chemicals

Rain may dilute the water in your pool, while the wind may scatter unwanted material. When it is safe to do so, do the following:

  1. Inspect the area. Stay away from damaged or flooded electrical equipment.
  2. Remove debris. Skim the surface and clear accessible baskets according to equipment instructions.
  3. Check circulation. Confirm the water level and system operation are normal.
  4. Test before treating. Adjust chemicals based on results, then follow product instructions for circulation and retesting.

If your pool has been contaminated by floodwater, sewage, or other foreign substances, do not allow swimmers to use the pool and call a professional to help. Never drain a pool as a precautionary measure unless you have received instructions from a professional.

Cold Fronts: Have a Freeze Plan

Cooler weather may reduce swimming activity, but it doesn’t eliminate maintenance.

Before the freeze dates begin in your area, consult a technician on what pumps and plumbing circuits are included in your freeze protection system. Pentair’s freeze-protection guidance encourages proactive planning with a pool pro and the right kind of circulation or automation.

Remember that freeze protection requires proper equipment and a working power supply, and that it provides no guarantee of protection in the face of extended cold. Likewise, create a manufacturer-specific plan of action in the case of a power loss or winterization with a professional before you end up in a vulnerable situation.

Build a Routine You Can Maintain

Try to make fast observations between servicing visits and perform detailed cleaning and equipment maintenance.

Check for Changes Between Visits

Listen for unusual sounds coming from your pumps and look for visible leaks not caused by opened equipment housings.

Loss of prime on returns, persistent air bubbles in returns and skimmers, and inconsistent filter pressure readings can be an indication of a problem, but will not identify the cause. Record observations, test results, and chemical additions for your service technician’s reference.

Make Time for Thorough Cleaning

Weekly brushing, vacuuming, and basket cleaning are a good start for many residential pools. Pay close attention and work around the clock if you have heavy usage or debris.

Make sure you’re using a brush that’s right for your finish, and check around stairs, in crevices, and on benches that an automatic cleaner might miss. Quick daily skimming helps, but won’t replace a thorough cleaning.

Ask your provider to show you how to do any of the checks you’re comfortable doing yourself. Knowing how water flow, equipment sounds, and pressure should be can help you troubleshoot. If you’re unsure how to open a basket or turn equipment off safely, ask for a demo instead.

Follow Your Filter’s Instructions

The cleaning procedure will vary according to the type of equipment, the amount of dirt, and other factors. Check the pressure differential at the same speed on the pump as you have when the filter is clean, according to the manufacturer’s specifications, and clean the filter if the level rises above that point.

Poolie’s pool filter cleaning guide explains common filter types. Follow your model’s manual for the procedure, and never open a pressurized filter housing while the system is operating.

Test Water More Often Than Your Service Visits

A weekly appointment doesn’t replace water testing between visits. The CDC recommends testing chlorine and pH at least twice daily and more often during heavy use.

Its residential-pool guidance recommends:

  • pH: 7.0–7.8.
  • Free chlorine: At least 1 part per million, or ppm.
  • With cyanuric acid or stabilized chlorine: At least 2 ppm free chlorine.

These chlorine figures are minimums, not entire operating ranges. Always follow the instructions on your sanitizer’s label and that of your equipment. Cyanuric acid is a stabilizer that helps to keep chlorine from being washed away by the sun.

Your broader testing plan should also cover alkalinity, calcium hardness, stabilizer, and salt where applicable. Poolie’s pool chemistry guide introduces these measurements.

Add chemicals according to test results and label directions. Never mix different chemicals, and only pre-dissolve a product when its label specifically directs you to do so.

Reduce Costs Without Skipping Essential Care

The most useful savings come from efficient operation and resolving recurring problems.

Match Pump Settings to Your Equipment

ENERGY STAR explains that variable-speed pumps can save energy by matching speed to different tasks instead of using one high speed for everything.

Have a technician establish settings that support circulation, filtration, and connected equipment. There’s no universal runtime for every pool.

Running overnight only lowers the electricity rate if your plan offers cheaper hours. Don’t override equipment requirements or freeze protection to pursue savings.

Use a Suitable Cover and Investigate Recurring Problems

A suitable cover can provide protection from evaporation; a cover’s ability to protect against debris is based on its construction. The manufacturer’s recommendations should be followed regarding weather and other factors, and the solar blanket should not be relied upon as a safety measure.

Investigation is required when there are repeated issues with cloudy water, loss of water, or deposits. If the chemical balance is off, purchasing more chemicals will only waste resources.

Know What a Round Rock Pool Service Includes

Request a detailed description in writing and confirm if the service includes cleaning, water treatment, equipment inspection, and any extra costs.

Ask if the regular cleaning involves brushing, vacuuming, removing dirt, and chemical balancing. You may also ask if cleaning filters, salt-cell, and recovery treatments are charged separately.

Poolie’s residential weekly maintenance service includes brushing, vacuuming, chemical balancing, and basket cleaning as well as backwashing if required. You will also get email reports with photos of the pool’s condition. Clarify if these services apply to your pool or if there are additional tasks involved.

Moreover, make sure to understand what actions you should take before the service provider’s arrival and how to notify them of special cases. Regular maintenance does not cover electrical or heater problems, servicing, or repair.

Contact a professional contractor if the water level is dropping for unknown reasons, poor water circulation, broken parts, or equipment malfunction. It is better not to reset the breaker that has tripped or try to repair a cracked pressure vessel.

Keep Your Next Pool Day on Track

If a storm messes up your pool before your Saturday swim, you still want to have a plan for getting it ready. A good rule of thumb is to check the area for any issues, clear away any debris, check circulation, and test the water before treating it.

If the water is so cloudy that you can’t see the bottom, the best idea is to wait to swim until things clear up. That way you can be sure there aren’t any problems causing the cloudiness. If the water is clear and tests fine, then you should be good to go.

Keeping up your pool the right way will make these kinds of decisions easy. If you need help coming up with a maintenance schedule that fits your pool and lifestyle, contact Poolie or fill out the form below to talk to us about pool maintenance in Round Rock.

Join Our Tribe of Delighted Texas Pool Owners

Forget the hassle of pool maintenance.

Poolie’s team of professionals can keep your pool serene and inviting without you lifting a finger. We offer everything from detailed cleaning to emergency repairs and restoration.

Poolie's Latest Tips & Tricks