Poolie Team: Apr 30, 2024
Your pool pump has been working well for years but recently has started making a strange buzzing sound. Everything appears to be fine on inspection however you are now left wondering whether it is a minor issue you can fix or if your pool pump is reaching the end of its life span.
Pool pumps can be tricky to diagnose. A buzzing motor could mean you have an electrical or mechanical issue however low water pressure could simply be due to a clogged basket. Knowing what problem you have can help prevent unnecessary repairs and damage to your equipment.
It is important to know what repairs you can carry out on your pool pump in Houston. This guide will provide you with an overview of common symptoms, how to troubleshoot and when it would be best to repair or replace your pool pump.
What Are the Signs Your Pool Pump Needs Repair?
There are some common issues that cause your pump to make odd noises, have low water flow, air bubbles, water leaks, and fail to start. Once you understand the issue you will be able to find the right solution.
1. Your Pool Pump Makes Unusual Noises
A working pool pump should make a constant hum from the motor. If there are any grinding, squealing, rattling or loud humming noises coming from your pump then this could be an issue.
This can be caused by worn bearings on the motor or blockages affecting the impeller which transfers the water. It can also be due to air getting into the suction pipework.
If you notice any grinding or squealing noises then it’s best to turn the pump off and get it checked out. This can cause further damage if not turned off.
2. Water Flow From the Return Jets Is Weak
A lack of flow from the return jets does not necessarily mean the pump is faulty. It could be caused by inefficient water flow due to an obstruction.
The most common causes are a blocked skimmer/pump baskets, dirty filter, incorrect valve settings or impeller blockage.
First you should check the water level within your pool and to ensure there are no blocks in the baskets you are able to access. If you have a variable speed pump then ensure it is running at the correct speed.
Once you have completed these basic checks and the flow is still poor, you may need to get a technician to investigate the pump, filter and pipework.
3. Air Bubbles Appear in the Pool
If you are constantly getting bubbles coming out of your return jets or within your pump basket then you may have a problem with air getting into your suction side.
This can be caused by a low water level in your pool, a loose pump lid, worn O ring on the pump lid or leaking pipework connections on your suction side.
First check your water levels. You can also visually check the seal on the pump lid if it is easily accessible. Ensure the system is safely turned off and depressurised (see manufacturer instructions).
If your pump is constantly losing prime (unable to hold the necessary water) you may need to get a professional to look at it.
4. Your Pool Pump Won’t Start
Your pump may not be starting due to issues with the timer, tripped circuit breaker, motor overheating or faulty electrical parts.
Firstly, check if there are any external controls and what time the pump should be running. If there is a display, note any error messages.
Whilst you can check to see if the circuit breaker is tripped, you should not continually reset it. If it continues to trip then this could suggest there is an electrical fault.
If your pump is making a humming noise, continually switching off or burning smell, switch off and contact a competent professional.
5. Water Is Leaking Around the Pump
Water collecting near your pump could indicate a worn shaft seal, leaking plumbing connection, or cracked pump housing.
The location of the leak may provide a clue, but water can travel along equipment surfaces before reaching the ground.
Look for visible moisture around accessible connections without opening pressurized components.
If the leak continues, involves the pump housing, or occurs near electrical equipment, shut down the pump and have it inspected.
How Can You Troubleshoot a Pool Pump Safely?
There are a few simple checks you can do to troubleshoot some common issues with your pool pump without needing to call out a technician or even having to take it apart or touch any electrics.
Step 1: Check the Pool Water Level
Ensure there is enough water in your pool to allow the skimmer to suck water into the pump. Many pools will require around half full of water in the skimmer however you should follow your equipment guidelines.
If you don’t have enough water you may find your pump has lost its prime. Refill to the correct level and follow the manufacturers guidelines to restart your pump.
Step 2: Clear Debris From the Baskets
Leaves and debris can cause blockages.
Switch off the equipment and disconnect the power. If your manufacturer allows you to clean the baskets as a homeowner then follow their guidelines to release any pressure before removing the pump lid.
Clean out any debris and check the baskets are clean. Ensure the O ring on the lid is correctly positioned.
Never open the pump/filter housing when it is running or under pressure.
Step 3: Review the Pump Settings
Check the timer/controller or variable speed pump screen to ensure that it is running on the correct schedule.
If you have a variable speed pump then if it is running at a slower speed during filtration then the return flow will not be as obvious and may not be faulty.
Check the settings against what you usually run on. Don’t increase speed unnecessarily.
Step 4: Observe the Pump After Restarting
Once you have completed any tests required, follow the manufacturers’ instructions to restart your system.
Watch your system to make sure there is a continuous flow of water coming out of the pump and no more air bubbles, unusual noises or error messages.
If it is still causing problems then stop trying to troubleshoot and book an inspection.
When Should You Call a Professional for Pool Pump Repair in Houston?
Professional pool pump repair is recommended when the problem involves electrical faults, internal mechanical damage, persistent leaks, or circulation issues that basic maintenance doesn’t resolve.
Some problems require specialized tools and diagnostic procedures to identify the actual cause.
Electrical or Motor Problems
Repeated breaker trips, overheating, burning smells, or a motor that won’t start can indicate electrical or mechanical faults.
Avoid opening motor housings, testing wiring, or attempting capacitor repairs. Some electrical components can retain a dangerous charge even after power is disconnected.
Pentair’s pump installation and maintenance guidance emphasizes electrical safety and proper servicing procedures.
Internal Component Damage
Worn bearings, damaged impellers, and leaking shaft seals may require professional repair.
A technician can identify which component is failing and determine whether repairing it will restore reliable operation.
Problems That Keep Returning
If you’ve cleared the baskets, checked the water level, and reviewed the settings but still experience weak flow or air bubbles, the issue may involve plumbing restrictions, suction leaks, or damaged pump components.
Professional diagnosis can help avoid unnecessary part replacements.
For broader equipment concerns, Poolie’s Houston pool repair guide covers other problems that may need professional attention.
Should You Repair or Replace Your Pool Pump?
Repairing your pump often makes sense when the problem involves a replaceable part and the remaining equipment is in good condition.
Replacement may be more practical when the motor has extensive damage, the housing is cracked, or the pump continues breaking down despite previous repairs.
Consider the following before deciding:
- Equipment condition: Is the problem limited to one component?
- Repair cost: Is fixing the pump considerably less expensive than replacing it?
- Parts availability: Are compatible replacement parts still available?
- Efficiency: Would a newer pump reduce long-term operating costs?
Variable-speed pumps can use less energy by operating at lower speeds when appropriate. The ENERGY STAR pool pump guidance explains how adjusting pump speeds can improve energy efficiency.
Actual savings depend on your equipment and operating schedule.
For a more detailed comparison, see Poolie’s guide on pool pump repair versus replacement.
How Can You Prevent Future Pool Pump Problems?
Regular pool maintenance in Houston helps reduce preventable circulation problems and makes developing equipment issues easier to spot.
A few habits can make a difference:
- Monitor the water level. Keep it high enough to prevent the skimmer from drawing air.
- Clean accessible baskets. Remove accumulated leaves and debris using the manufacturer’s shutdown procedures.
- Maintain the pool filter. Clean or backwash it according to its type and manufacturer recommendations.
- Pay attention to unusual sounds. New noises, vibrations, or leaks deserve attention before they worsen.
- Keep the equipment area clear. Avoid blocking motor ventilation openings or allowing debris to accumulate.
After Houston’s heavy storms, checking for debris around the pool and equipment can also help maintain proper circulation.
Regular maintenance won’t prevent every failure, but it can help you identify smaller issues before they interrupt pool operation.
Know When Your Houston Pool Pump Needs Professional Attention
Noticing a strange hum coming from your pool pump does not necessarily mean you need to replace your pump. However, it is still something that can be addressed. Depending on why your pump is making the strange noises, you may be able to fix the issue by simply adjusting something or by having repairs done using specialist tools.
If simple fixes such as checking the settings on your pump, ensuring correct water levels and cleaning out baskets are not the issue, it is better to get a professional to look into the issue if it is electrical.
Poolie offers pool repair services in Houston, including pump and filter repair. If you’re unsure what’s causing the problem, you can contact Poolie to discuss your options.